Aquarium setup: step-through-step

4.Aquascape with stay and/or plastic flowers.
Ideally, these have to be organized to hide your device.
If you’re adding stay flora, ensure the water is warm enough for them. Plant the roots lightly beneath the floor of the gravel, leaving the crown (if the plant has one) exposed.
Remember to preserve live flora moist until they’re planted—moist newspaper works properly. For foremost increase and root improvement, use an aquatic plant fertilizer inclusive of Tetra® FloraPride® and the proper lighting.

5.Add the relaxation of the water.
Fill your tank to the lowest of the pinnacle body —leaving some air space among the water and the quilt.

6.Set up your filter out and “cycle” your new tank. If you are using…

…any outdoor filters:
Fill them with clear out materials or clear out cartridge.
Position them in step with instructions.
Make sure it’s far primed (filled) with water.

…”dangle on tank” clear out that has a pickup tube:
Extend the tube as close to the bottom of the tank with out being within the gravel. If it is too lengthy, you may cut it to period and reattach the consumption cage.
Be sure to open the clear out lid and fill the filter out with water to “high” the pump.

7.Secure the submersible heater close to your water glide and vicinity the thermometer as a long way away from the heater as feasible.
Make certain you’ve got a thermometer that’s easy to read. Most outlets sell an adhesive thermometer that clings to the outdoor floor of the glass. Plug it in simplest after it’s miles within the water.

8.Plug on your air pump, energy clear out and heater and start them up.
Important: Do no longer turn on the heater whilst it’s not immersed in water—the heating element can malfunction and overheat, and the glass tube can shatter if positioned in water at the same time as warm.
Check the air outlets and alter the settings.
Make certain water is flowing well through your power clear out.
Adjust the heater to the right temperature. It will take 24 hours for the temp to stabilize and you can have to modify your placing.
Wait 24 hours to make sure all device is working well earlier than including fish.

9.Check the situations and temperature after some hours.
Water in new aquariums will frequently turn cloudy for a day or two. This is caused by a innocent bacterial boom and ought to disappear certainly. Check the pH and hardness of your water the use of a Tetra® Test Kit and our convenient My Aquarium App.

10.Congratulations!
Your new aquarium is fish-secure, fish-geared up and absolutely prepared. The final step? Introducing your new pets to their new home, which you may see the way to do here.
If you have any setup questions or want any help or help, experience unfastened to touch certainly one of our friendly TetraCare specialists. We’re always glad to assist.