The Importance of Red Oxide Flooring

The method of the use of colored cement for flooring is observed in other elements of India too, consisting of the Chettinad tiles. In Bangalore too, there were many antique buildings made with oxide floors. Even carpet like styles are embossed in the ground the use of one-of-a-kind colours including the coloured floors in most of the old homes in Goa. The vintage technique for the colored ground used egg white, a lot just like the fresco technique.

However, the fine of the oxide floors, whatever the shade, depends lots at the craftsmanship. Only an professional craftsman can lay a great floor without cracks and that does not develop patches with time. The technique is exhausting and requires eager interest.

The largest enchantment of the oxide flooring is its economic viability. These days, various hues of oxide floors are to be had.

The Curing Process to Follow

The day after doing the floor, cure the floor with the aid of sprinkling water every two to a few hours for an entire day, to avoid a dry ground.

The second day, a skinny sheet of water ought to be stocked up to test if white patches seem on the ground. If they do, remove the water, rub them off with a fabric and once more fill up water, till no white patches are visible.

Once the floor is laid, no person need to stroll on it for at the least four days, except for watering and waxing.

Let the floor dry for some days, clean it by way of wet and dry mopping and apply 400 grade sand paper in case smoothening and levelling is enquired.

Red colour wax have to now be carried out directly on the surface with a smooth fabric.

As the wax dries, rub the floor with rice husk or coconut pith in round style until the wax disappears. Keep the room closed for 3 days in order that the ground absorbs the wax absolutely.

THE FINER POINTS TO NOTE

♦ The water ought to be easy or dealt with, and clearly not the mineral-wealthy borewell water.

♦ White cement and high grade gray cements tend to set rapid, hence now not advisable. Sand ought to not have silt deposits.

♦ Quality of crimson oxide is essential to make certain that wear and
tear across the years does not reveal the concrete below.

♦ For 1 component oxide, up to a few components, grey cement gives darkish
pink colour. Increasing cement leads to mild red shades.

♦ White cement may be used to get one of a kind sunglasses cautiously.

♦ Cement and oxide ought to be first mixed in dry form, slowly including water to get a constant slurry-like blend. Any lump formation in the blend will show up in the flooring. Trowelling to get an even floor is very vital.

♦ Oxide flooring want to be performed in one continuous stretch with out break, often taking a whole day & night relying upon region.

♦ Most materials become worse with age, however the oxide ground is an exception. It shines extra the longer it’s far used!